起重機的起升機構與運行機構
Lifting mechanism and operation mechanism of crane
一、起重機的起升機構
I. Lifting mechanism of crane
起重機起升機構的驅動裝置采用電力驅動時為電動機。其中，葫蘆起重機多用異步鼠籠式電動機，其他電動起重機多采用繞線式異步電動機，或直流電動機。履帶、鐵路起重機的起升驅動裝置為內燃機。汽車、輪胎起重機的起升機構驅動裝置是有原動機帶動的液壓泵、液壓油缸或液壓電動機。起升機構中取物纏繞裝置包括起升卷筒、鋼絲繩、定滑輪、動滑輪、吊鉤等。
When the driving device of crane hoisting mechanism is driven by electric power, it is an electric motor. Among them, the hoist crane mostly uses asynchronous squirrel cage motor, other electric cranes mostly use winding asynchronous motor, or DC motor. Crawlers and railway cranes are driven by internal combustion engines. The driving device of lifting mechanism of automobile and tyre crane is hydraulic pump, hydraulic cylinder or hydraulic motor driven by the prime mover. The winding device of lifting mechanism includes lifting drum, wire rope, fixed pulley, movable pulley, hook, etc.
2、起重機的運行機構
2. Operation mechanism of crane
起重機的運行機構可以分為軌行式和無軌性式運行機構（輪胎、履帶式運行機構），這里只介紹軌行式運行機構。軌行式運行機構除了鐵路起重機以外，基本上都是電動機驅動形式，此運行機構是由電動機、制動器、減速器和車輪四部分組成。
The operation mechanism of crane can be divided into rail running mechanism and trackless running mechanism (tyre and crawler running mechanism). Here only the rail running mechanism is introduced. In addition to railway cranes, rail-type operating mechanism is basically motor-driven, which consists of four parts: motor, brake, reducer and wheel.
車輪裝置由車輪、車輪軸、軸承及軸承像等組成。采用無輪緣車輪，是為了將輪緣的滑動摩擦變成滾動摩擦，此時應該增設水平導向輪。車輪與車輪軸的連接可采用單鍵、花鍵、或者錐套等多種形式。
Wheel device consists of wheel, wheel axle, bearing and bearing image. The purpose of using flangeless wheels is to change the sliding friction of flanges into rolling friction. Horizontal guide wheels should be added at this time. Wheels and axles can be connected by single key, spline, or taper sleeve.
起重機的運行機構分為集中驅動和分別驅動兩種形式。集中驅動是有一臺電動機通過傳動軸驅動兩邊車輪轉動運行的運行機構形式，集中驅動只適合小跨度的起重機或起重小車的運行機構。分別驅動是兩邊車輪分別由兩套獨立的無機械聯系的驅動裝置的運行機構形式。
The operation mechanism of crane can be divided into two types: centralized drive and separate drive. Centralized drive is a kind of running mechanism in which a motor drives the wheels on both sides to rotate through a drive shaft. Centralized drive is only suitable for the running mechanism of a small span crane or a lifting car. Separate driving is the operation mechanism of two sets of independent driving devices with no mechanical connection on both sides of the wheel.
隨著葫蘆式起重機技術的發展，電動機采用錐形制電動機，將制動和驅動兩個功能合二為一，進一步發展為將電動機、制動器和減速器合三為一，不再需要聯軸器連接，構成一個十分緊湊的整體，稱為錐形制動減速電動機，目前已被應用到起重機的大車和小車上。
With the development of hoist crane technology, the motor adopts conical motor, which combines braking and driving functions into one, and further develops into a combination of motor, brake and reducer, which no longer needs coupling connection, and forms a very compact whole, called conical brake deceleration motor. It has been applied to crane's large and small cars.
